Density - Konica Minolta 7022 Instruction Manual

[2] Density

Set Copy density to be effective after power on or after Auto/Reset occurs.
❒ Setting options: AE; manual
❒ Default setting: AE on
Key Operator Mode Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 2.
Density to display the Copy Density Initial Setting Screen.
2 Touch AE to select AE mode, or touch the density level required.
Nine exposure levels are displayed.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. If
other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[2] Copier Initial (continued)
Copier Initial Setting Screen
Copy Density Initial Setting Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.K.C.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
Key Operator
Mode
11-9