Tray - Konica Minolta 7022 Instruction Manual

[4] Tray

Set paper tray priority to be in effect after power is turned on or after Auto Reset occurs.
This function sets tray priority, not paper size priority. Therefore, if paper size is
changed in the tray, the tray will still remain the priority tray.
The initial paper tray setting should not conflict with the initial setting for Lens Mode. For
example, if the initial paper tray setting is APS, the initial setting for paper tray priority
will be ignored.
❒ Setting options: APS; trays 1, 2, 3, 4, or Multi-sheet bypass tray
❒ Default setting: APS on, no specified tray
Key Operator Mode Screen
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 4.
Tray to display the Tray Initial Setting Screen.
2 Touch APS, or touch any tray key to select a specific tray.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. If
other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[2] Copier Initial (continued)
Copier Initial Setting Screen
Tray Initial Setting Screen
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.K.C.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
Key Operator
Mode
11-11