Making Single-Sided Copies From Double-Sided Originals (2 1 ); Making Single-Sided Copies From Double-Sided Originals; Output Without Finisher - Konica Minolta 7022 Instruction Manual

Making Single-Sided Copies from Double-Sided Originals (2

Use RADF and select 2
originals.
2-1 Copying
Double-sided original
1.
Touch 2 1 on the Basic Screen to highlight it.
a
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Select additional copy conditions, as desired.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange the settings so that they are compatible with the
selected copy mode.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
4.
Position originals FACE UP in the document feeder.
• See p. 3-2 to p. 3-4 for details on positioning originals.
• Use RADF store mode (p. 3-22 to p. 3-24) when the original count
exceeds 50.
5.
Press [START].
The machine starts to scan originals, then prints simplex copies when they are ready
for output.
Press [STOP/CLEAR] to suspend the scanning or printing job.
1 copy mode to make single-sided copies from double-sided
a
Front
Front
Front
Front
Front
Reminder!
DETAILS
HINT
HINTS
Front Back
Front Back
Front Back
Front Back
Front Back
Simplex copy
1 )
a
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-21