Subnet Mask Setting - Kyocera FS-1018MFP Basic Operation Manual

Subnet Mask Setting

Registering the Default Gateway
BASIC OPERATION GUIDE
Continue from the previous Step 8 to register the Subnet Mask address.
NOTE:
If you are not sure of the appropriate Subnet Mask address,
contact your Network Administrator.
1 Access the TCP/IP Settings screen.
2
Press or to select Subnet
Mask and press [Enter].
The Subnet Mask screen
displays.
3 Enter the Subnet Mask address using the same procedure used for the IP
Address in steps 6 through 8 of IP Address Setting.
Use the following procedure to register the Default Gateway address. If
you are not sure of the appropriate Default Gateway address, contact your
Network Administrator.
1
Access the TCP/IP Setting screen.
2
Press or to select Default
Gateway and press [Enter].
The Default Gateway screen
displays.
3
Enter the Default Gateway address using the same procedure used for the
IP Address in steps 6 through 8 of IP Address Setting.
Preparation
TCP/IP Setting:
DHCP
IP Address
Subnet Mask
Exit
TCP/IP Setting:
IP Address
*
Subnet Mask
Default Gateway
Exit
3-13