Selecting Scan Color Mode - Kyocera FS-1018MFP Basic Operation Manual

Basic Operation

Selecting Scan Color Mode

4-22
The following color modes are available for scanning:
Mode
Full Color
Grayscale
Monochrome
NOTE:
Refer to the Advanced Operation Guide for the procedure to set
the Scan Color mode.
The maximum resolution using full color and grayscale modes is 300 dpi.
To scan in full color or grayscale at 400 dpi or 600 dpi resolution, expand
the amount of the internal memory. Refer to Expansion Memory on page
5-7.
1
Press [E-Mail]. The Scanner Basic screen displays.
2 Press [Scan Color Select].
3
Press or to select the
required mode and press [Enter].
A Completed message displays
and the Scanner Basic screen
returns.
4 Press [Start] to commence scanning.
When scanning is completed, the machine automatically sends an e-mail
to the destination address with the scanned image attached.
Description
The original will be scanned in full color.
The shading of the original will be reproduced.
The original will be scanned in monochrome.
The resulting file size for the scan data will be
smaller in comparison with the other color
modes.
ScanColor Select:
*
Full Color
* Grayscale
Monochrome
Cancel
BASIC OPERATION GUIDE