Continuous Scan - Kyocera KM-2560 Advanced Operation Manual

Continuous Scan

ADVANCED OPERATION GUIDE
When a large number of originals cannot be placed in the document
processor at one time, the originals can be scanned in separate batches
and then copied as one job. With this function, originals are scanned until
you press [Scan Finish].
Any of the following settings can be changed during scanning.
• Original size selection
• Original orientation
• Image quality selection
• Type of original (2-sided/book original)
• Zoom
• Border erase
• Density
If you use Job Build, you can insert a blank paper during scanning or a
blank page during duplex copying.
The procedure for making copies using Continuous Scan is explained
below.
1
Press the Copy key.
2
Press [Advanced Setup] and then [Continuous Scan].
3
If Continuous Scan is selected, press [On].
If Job Build is
selected, press [Job
Build] and select
desired binding
orientation.
4
Press [OK].
5
Place the originals in the document processor or on the platen and press
the Start key.
Ready to copy.

Continuous Scan

Off
On
Press [ OK] to display
the image.
Job Build
Binding
Left
Add Shortcut
Status
Copying Functions
Copies
1
Select desired binding orientation .
Binding Binding
Right Top
Cancel OK
10/10/2007 10 :10
1-45
1