Relay Broadcast Report - Xerox WorkCentre M24 Reference Manual

10.10
The Relay Broadcast Report allows you to check the Relay Broadcast results.
The Relay Broadcast Report is printed when set to print automatically. It cannot be printed
manually.
When set to print automatically, it is printed automatically after a Relay Broadcast opera-
tion.You can also have the report transmitted to the initiating station. For details on settings,
see "10.2.2 Printing Reports and Lists Automatically" (P. 207).
10
No.
Doc.
Remote Station
Start Time
Duration
Pages
224

Relay Broadcast Report

Item
The serial numbers for transmissions is shown.
Job numbers that the machine automatically assigned to
documents when the documents were received.
Information on recipient to which transmission is made is
recorded in the following order of priority.
ITransmitting (speed dialing)
1
Recipient
2
Remote terminal name
3 G3 ID (including spaces)
4 Tel No.
5 Communication mode EC (or G3, SG3)
ITransmitting (when all digits are dialed)
1 Remote terminal name
2 G3 ID (including spaces)
3 Tel No.
4
Communication mode EC (or G3, SG3)
IReceiving
1 Remote terminal name
2 G3 ID (including spaces)
3 Communication mode EC (or G3, SG3)
The date and time that the communication began are shown.
In Batch Send, the start time of the transmission for each
document is recorded.
The communication length is indicated. In Batch Send, the
length of time taken for a transmission for each document is
recorded.
"-" is indicated when the number of pages is 0.
ITransmitting
The number printed on the left side of the slash "/" indicates
the number of pages that were successfully transmitted. The
number printed on the right side of the slash "/" indicates the
number of total pages.In Manual Send, the number of total
pages is not shown.
IReceiving/Polling
The number of pages that the machine successfully received
is shown.
Description