Xerox WorkCentre M24 Reference Manual page 176

Fascimile functions
Hide thumbs Also See for WorkCentre M24:
Table of Contents

Advertisement

9.3 Setting an Address Number
IItems that can be used in Create/Delete operations using recipients
of Internet Fax (iFAX) function
No.
Item
1
E-mail Address
2
Recipient Name
3
Index
4
Communication
Mode
5
Resolution
6
Maximum Image
Size
7
iFAX Profile
9
For details on how to enter characters, see "1.5 Entering Text" (P. 8).
152
Description
Addresses of up to 128 characters can be entered.
Names of up to 18 characters can be entered.
Enter a alphanumeric character as an index, a key word that
you can use in searching Address Numbers in the Address
List.
You can enter one alphanumeric character.
The Communication Mode can be set when the Fax Gateway
function is used.
Select the G3 Auto button. When a remote machine
is specified using Address Number set in the Com-
munication Mode, it is not possible to change the communica-
tion mode in the Fax screen.
The Communication Mode is set as the Communication Mode
between the fax destination and Fax Gateway. Faxes are transmitted
through G3 Auto until the Fax Gateway. For information on the Fax
Gateway function, see "13.4.2 Sending Faxes to Recipients as Relay
Centers" (P. 284).
Sets the Resolution used during transmission.
Select the Panel button (resolution selected from the control
panel), the Standard button, the Fine button, the Super-fine
(400dpi) button and the Super-fine (600dpi) button.
Set Maximum Image Size to A3 / 11", B4 or A4 / 8.5" for the
remote machine as dictated by its maximum receiving docu-
ment size and capacity profile.
A profile is an agreement between transmitting and receiving
iFAX machines that limit image resolution, paper size and
other attributes. Select the TIFF-S button, the TIFF-F button or
the TIFF-J button.
Default
value
Not Set
Not
Entered
Not
Entered
G3
Auto
Panel
A3 / 11"
TIFF-S

Advertisement

Table of Contents
loading

Table of Contents