Xerox WorkCentre M24 Reference Manual page 289

G When receiving E-mails via POP3
No. Settings
G Set the following at the Control Panel or using the Internet Services.
1 IP address
2 Subnet mask
3 Gateway address
Start up the computer and set up with the Internet Services.
G
4 SMTP server address
5 Machine mail address
6 POP3 server address
7 POP user name
8 POP user password
You cannot receive E-mails to a Mailbox via POP3. Sending faxes using the fax gateway feature will
not be available as well.
Example
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ifax@mb1.abc.xerox.com
Account name: ifax
xxx.xxx.xxx.xxx
"xxx" indicates the number of 0 to 255.
13.2 Setting the Environment
Remarks
Auto setting by DHCP is
available.
Set the following settings as
required.
Set the following settings as
required.
Set the IP address for the
outgoing mail server.
Enter the POP user name
(on the left side of @) and
incoming POP3 mail server
name in the address sec-
tion (on the right side of @).
You can set an alias, such
as ifax@xerox.com
Set the IP address for
incoming mail server.
This is an account for connect-
ing to the incoming mail
server.
You can set only one user.
Use alphanumeric charac-
ters.
13
265