Output Destination-Line Setup - Xerox WorkCentre M24 Reference Manual

9.8.8

Output Destination-Line Setup

When the output module option is installed, it is possible to set output destination
by incoming line, mail (Internet Fax (iFAX) received document and received mail
document) and mailbox print doc.
This item is not indicated unless an output module option is installed.
The following settings can be made using the Output Destination-Line Setup set-
tings.
Output Destination - Line Setup
Items
1. Line 0 (Extension)
2. Line 1
3. Line 2
4. Line 4
5. iFax
Output Destination - Line Setup
Items
6. Mailbox Printed Documents
Line 2 and 4 can be specified when an option is installed.
1. Line 1
2. Line 2
3. Line 4
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Center Output Tray.
Setting value
0
1
2
Current Settings
0
0
1/2
0
0
0
Current Settings
0
2/2
4. iFAX
5. Mailbox Printed Documents
Center Output Tray
Side Output Tray
Finisher Tray
Close
Change
Settings
Close
Change
Settings
Description
9.8 Other Items
9
199