Xerox WorkCentre M24 Reference Manual page 221

16. 2 Sided Printing
This function allows the machine to print received documents (included iFAX received document) or
reports onto both sides of a sheet. This is effective in saving paper.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is Off.
Some data may not permit you to print on both sides of a sheet even when this function is set to On.
Setting value
0
1
17. Doc. Feeder Detect Method
This function allows you to select whether size detection in the document feeder is to be performed
using the A/B system or inch system.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
A/B system.
For details on documents, see "Chapter 2 Loading Documents" (P. 9).
Setting value
0
1
18. Reduce 8.5×11" Original to A4
When Reduce/Enlarge in the Scan Options screen is set to Auto %, it is possible to select whether or
not a received 8.5 × 11 inch
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Same Size.
For details on documents, see "Chapter 2 Loading Documents" (P. 9) and for details on Reduce/Enlarge, see
"8.4 Scanning Documents at a Specified Size/Ratio (Reduce/Enlarge)" (P. 93).
Setting value
0
1
19. Pseudo-Photo Gradation Mode
This function performs grey level correction for documents containing photographs.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Error Diffusion.
Setting value
0
1
Off
On
A/B system
Inch system
document is to be reduced to A4 size .
Same Size
Reduced to A4 size
Error Diffusion
Dithering
Description
Description
Description
Description
9.8 Other Items
9
197