Xerox WorkCentre M24 Reference Manual page 222

9.8 Other Items
20. Selector - Line Setup
This function determines whether or not Selector - Line Setup is to be used.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Off.
For details on the Selector, see "8.15 Sorting Received Documents Into Mailbox (Box Selector)" (P. 135).
Setting value
21. Memory Full Procedure
This function determines what to do when the machine runs out of hard disk space while scanning a
fax document.
Referring to the table below, use the numeric keypad to enter the desired value. The default value 0 is
Off.
Setting value
22. Maximum Stored Pages
This function allows you to set the maximum number of stored pages.
Use the numeric keypad to enter the desired value. A value between 1 to 999 pages can be set in 1
page increments. The default value 999 is 999 pages.
9
198
0 Off
1 On
0 Off (Stored documents are deleted)
1 Stored data is intact.
Description
Description