Xerox WorkCentre M24 Reference Manual page 81

4.3 Transmitting Documents Through a Remote Relay Station (Remote Relay Broadcast)
3
Select Keyboard to display the keyboard on the touch panel and enter
the following format.
The 1st relay station
telephone number
Select the Next Recipient button for multiple Relay Broadcast jobs.
Use the keyboard on the touch panel display to enter symbols like "!" or " ∗ ". For details on how to
enter symbols, see "1.5 Entering Text" (P. 8).
4
Press Start .
Scanning and transmission begins.
Sending manually (picking up the handset or leaving the handset
on-hook)
The dialing format is as follows.
The 1st relay station
telephone number
G This method is available for transmission only between machines of this model.
G The above dialing format can be registered in Address Number to enable dialing using an Address
Number. For details on how to register Address Numbers, see "9.3 Setting an Address Number"
(P. 150).
Procedure
1
Load documents.
"2.2 Loading Documents" (P. 14)
Password
Confirm the
Confirm the
continuous,
facsimile tone
short high-pitched
tone
Relay Address
station ID Number
Relay
Password
station ID
Address
Number
4
57