Environment Setting - Xerox WorkCentre M24 Reference Manual

13.2 Setting the Environment
13.2.2
It is necessary to set the items in advance to use the iFax feature.
Flow of the Environment Setting
Set the environment with the following steps.
13
262

Environment Setting

Set up the IP Address
Use the Touch Panel Display or Internet Services and set up the IP address
for the machine. For details on setting operation, see "13.2.3 Setup the Envi-
ronment" (P. 266).
Activate the Port
Use Internet Services to Activate the port for Sending E-mails and Receiving
E-mails in the Activate the port. For details on setting operation, see "13.2.3
Setup the Environment" (P. 266).
Set up the E-mail and the TCP/IP environment
Use Internet Services to set up the E-mail and the TCP/IP environment.
See " Setting Information" (P. 263) in "13.2.2 Environment Setting". For
details on setting operation, see "13.2.3 Setup the Environment" (P. 266).
Confirming the settings
See "13.2.4 Confirming the Settings" (P. 269) to print out the Features Set-
tings List and check the settings.
Send E-mails
See "13.3.1 Sending E-mails" (P. 270) and send an E-mail to the address of
the machine to make sure that the setting is correct. If the E-mail cannot be
sent, check the environment setting.