On-Hook Dialing - Xerox WorkCentre M24 Reference Manual

3
Dial the telephone number.
[ Fax No. ]
Off-hook
Alphanumeric
Symbol
Use the numeric keypad, Address Number or one-touch buttons. You cannot use the Address Book.
G When the line type is set to a tone line, the Tone (:) button will not be displayed.
G When a dial pulse line is in use, select Tone (:) if you want to send a tone (to receive services for
tone lines).
G
Some types of services are sometimes not received even if tone transmission is set.
4
Answer when you hear the voice of the
other party.
5
Place the handset back on the cradle after hanging up.
Be sure to replace the handset properly as the line will otherwise not be disconnected and the tele-
phone will remain "busy".
6
Press Close.
7.1.2

On-hook Dialing

This section describes how to dial with the handset on the cradle, On-hook dial-
ing.
We recommend that the line monitor volume be set to the Loud when selecting
this feature.
The line monitor volume can be changed in the System Administration Mode. For details on how to
change this default value, see "9.8.2 Audio Tones" (P. 182). The default factory setting is Normal.
A B C D E F G 1 2
H I J K L M N 4 5
O P Q R S T U 7 8
V W X Y Z 0
7.1 Making a Telephone Call
Memory :100%
Close
3
6
Shift
9
7
79