Specifying Document Size For Transmission (Scan Size) - Xerox WorkCentre M24 Reference Manual

8.2
Specifying Document Size for
Transmission (Scan Size)
You can specify the document size of documents you transmit. Specify document size when
you wish the document to be sent in a size different from the loaded document. When a doc-
ument size is specified, it is scanned at the specified size regardless of the size of the
loaded document. The feature allows you to add a margin to or delete excess space from
the actual image that is transmitted. Specify document sizes as described below.
G Auto Detect
Document sizes are automatically detected.
G Standard size
Document size is selected from 11 sizes (A3
8.5×11" and 8.5×11" )
G The factory set default for buttons other than the Auto Size Detect button can be changed in the System Admin-
istration Mode. For details on how to change this default value, see "9.8.10 Setting Scan Size Defaults"
(P. 201). The factory set defaults are A3
8.5×11" and 8.5×11" .
G When a document size cannot be set automatically, a message prompting document size entry appears.
G When the Internet Fax (iFAX) function is used for transmission and TIFF-S is selected in the iFAX Profile in the
On-Hook/Others screen, any size larger than A4 that is selected is automatically reduced to A4. For details on
iFAX Profile, see "13.3.2 Settings That are Configurable During an Outgoing iFax Transmission" (P. 273).
When a document size is set, the document is scanned as shown below.
Document
, A4 , A4 , A5 , B4
, A4 , A4 , A5 , B4 , B5
Scanned image
Specifying smaller size
than the document
Specifying larger size
than the document
, B5 , B5 , 11×17" , 8.5×14"
, B5 , 11×17" , 8.5×14"
Image
loss
Blank
,
,
8
87