Send To Mailbox (Fax Signal Method) - Xerox WorkCentre M24 Reference Manual

There are two methods for the Send to Mailbox and Retrieve from Mailbox operations:
Fax signal method
Unique signal method only for machines that have the Remote Mailbox feature.
The G3 mode is available.
DTMF method
G3 facsimiles that allow Manual Send or Manual Receive provide the Remote
Mailbox and Retrieve from Mailbox features.
F Code method
Remote Mailbox and Retrieve From Mailbox can be used among types of
machines that have the F Code function. The G3 mode is available.
8.14.1

Send to Mailbox (Fax Signal Method)

Use one of the two following methods to perform a Send to Mailbox operation:
To perform a remote mailbox operation, you must know the mailbox number of
the remote machine.
G Select the Remote Mailbox feature in the On-Hook/Others screen.
G Register the remote mailbox in an Address Number and use the Address Num-
bers.
For details on how to register Address Numbers, see "9.3 Setting an Address Number" (P. 150).
This section describes how to perform a Remote Mailbox operation in the On-
Hook/Others screen.
For details on how to dial a number, see "3.4 Dialing" (P. 27).
Procedure
1
Load documents.
"2.2 Loading Documents" (P. 14)
8.14 Using the Mailbox Feature (Remote Mailbox/Retrieve from Mailbox)
8
119