Xerox WorkCentre M24 Reference Manual page 257

Fascimile functions
Hide thumbs Also See for WorkCentre M24:
Table of Contents

Advertisement

Items to
Status
check
The
received
The document
data is split or
from the
part of the data
sender may be
is missing.
longer than the
set sizes, or
the sender's
scanner
stretched the
document
when it was
scanned.
The received
Is the drum/
image quality
toner cartridge
is poor.
damaged?
Is the scanner
of the remote
machine
clean?
Is the resolu-
tion level set-
ting for the
remote
machine too
low?
Countermeasures
Auto Reduce on Receipt and Border Limit can be com-
bined on this machine for when documents, like those
described in the items on the left, are received.
Auto Reduce
on Receipt
Border
Limit
When border
The document
limits are not
is automati-
exceeded
cally reduced
and output as
one page.
When border lim-
The document is output at the
its are exceeded
same magnification on sepa-
rate pages.
For details about how to set Auto Reduce on Receipt and
Border Limit, see "9.8.7 Fax Control" (P. 192)
Make a copy to check the condition of the drum car-
tridge. Replace the drum cartridge if necessary.
Ask the remote station.
Poor output quality may be caused by the remote machine.
Ask the remote station.
Poor output quality may be caused by the remote machine.
11.1 Troubleshooting
On
Off
The portion
that exceeds
the set page
size is cut off
and the docu-
ment is out-
put.
11
233

Advertisement

Table of Contents
loading

Table of Contents