Settings That Are Configurable During An Outgoing Ifax Transmission - Xerox WorkCentre M24 Reference Manual

13.3.2
Settings That are Configurable During an
Outgoing iFax Transmission
This section describes the settings that are configurable for sending E-mails
using the iFax feature. These settings are as follows.
Screen
Basic Features
Scan Options
Send Options
On-Hook/Others
You can specify the Communication Mode in the Send Options only when sending faxes using fax gate-
way feature. The faxes will be sent in G3 Auto other than this. See "13.1.2 The Differences Between
iFax and Facsimile Features" (P. 259) for details on the fax gateway feature.
Feature
Resolution
Original Type
Lighter/Darker
2 Sided Originals
Scan Size
Mixed Size Originals
Reduce/Enlarge
Bound Originals
Multiple Up
Communication Mode
Transmission Report
Read Status (MDN) /
Send Status (DSN)
iFax Profile
13.3 Receiving and Sending E-mails
Reference
"3.1.1 Resolution" (P. 20)
"3.1.2 Original Type" (P. 21)
"3.1.3 Lighter/Darker" (P. 21)
"8.1 Transmitting Two sided Origi-
nals (2 Sided Originals)" (P. 84)
"8.2 Specifying Document Size for
Transmission (Scan Size)" (P. 87)
"8.3 Scanning Documents in Vari-
ous Sizes (Mixed Size Originals)"
(P. 90)
"8.4 Scanning Documents at a
Specified Size/Ratio
Enlarge)" (P. 93)
"8.5 Transmitting Facing Pages on
Separate Sheets (Bound Origi-
nals)" (P. 95)
"8.6 Merging Several Pages Onto
One Sheet (Multiple Up)" (P. 97)
"3.3 Selecting a Communication
Mode (Communication Mode)"
(P. 25)
"10.2.3 Printing a Transmission
Report" (P. 208)
" Setting the Read Status
(MDN) / Send Status (DSN)"
(P. 274)
" Specifying iFax Profile"
(P. 276)
13
(Reduce/
273