Fax Signal Method - Xerox WorkCentre M24 Reference Manual

4.3 Transmitting Documents Through a Remote Relay Station (Remote Relay Broadcast)
4.3.1

Fax Signal Method

Before using the fax signal method, program the initiating station, first relay sta-
tion and second relay station in Address Number.
For details on how to register Address Numbers, see "9.3 Setting an Address Number" (P. 150).
Where
Initiating
station
4
First relay
station
Second
relay
station
Procedure
1
Load documents.
"2.2 Loading Documents" (P. 14)
54
Assign the first relay station to an Address Number (001 to 500) to set up
G
the relay broadcast send feature.
• Program the last two digits of the Address Number of the initiating station
(which is already programmed at a relay station) as a relay station ID for
the relay broadcast send operation.
• Program the Address Number of the second relay station (which is
already programmed at the first relay station) as a relay broadcast
receiver.
G Assign the initiating station to an Address Number from 001 to 099, and set
Relay Station Setup of the Address Number to On.
G Assign the second relay station to an Address Number from 001 to 099.
• Program the two last digits of the Address Number of the first relay station
(which is already programmed at the second relay station) as a relay sta-
tion ID for the Relay Broadcast Send operation.
• Program the Address Numbers of the destinations (which are already
programmed at the second relay station) as broadcast receivers.
Assign the first relay station to the same Address Number as that of the ini-
G
tiating station programmed at the first relay station, and set Relay Station
Setup of the Address Number to On.
G Program the destinations to Address Numbers between 001 and 500.
Destinations of Address Number 100 or above can be programmed into a
G
group.
What is required