Front And Rear Bracket Assembly - HP StorageWorks HA-Fabric Manager Installation Manual

b.
c.
5. Attach each bracket assembly to the rack-mounting standards as shown in
the appliance mounts through the front of the cabinet, ensure the front bracket portion
of the assembly faces the cabinet front.
26
Figure 2.2. Front and Rear Bracket Assembly
Partially tighten each screw so that the assembly is held together but not completely
secure. This allows for slight adjustment of the bracket length during installation
in the cabinet.
Ensure the left and right bracket assembly lengths are equal to the cabinet depths
recorded in step 2.
hp StorageWorks HA-Fabric Manager Appliance Installation
Chapter 2. Installation
Figure 2-3. If
Guide