Operations Inlive Viewmode; Front Panel Operation - HIKVISION DS-9100HWI-ST Series User Manual

User Manual of DS-9100HWI-ST Series DVR

3.2 Operations inLive ViewMode

In live view mode, there are many functions provided. The functions are listed below.
•
Single Screen: showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen
on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
All-day Playback: play back the recorded videos for current day.
•
Aux/Main output switch: the DVR checks the connection of the output interfaces to define the main and
auxiliary output interfaces. The priority level for the main and aux output is HDMI=VGA>CVBS.
HDMI
1
2
3 ×
4 ×
means the interface is in use,
HDMI, VGA and CVBS can be used at the same time.
When the aux output is enabled, the main output can't do any operation, and you can do some basic operation
on the live view mode for the Aux output.
3.2.1 Front Panel Operation in Live View
Functions

Front Panel Operation

Show single screen Press the corresponding Alphanumeric button. E.g. Press 2 to display only the screen
for channel 2.
Show multi-screen Press the PREV/FOCUS- button.
Manually switch Next screen: left direction button.
screens Previous screen: right direction button.
Auto-switch Press Enter button.
All-day playback Press Play button.
Switch between main Press Main/Aux button.
and aux output
Table 3.2Priorities of Interfaces
VGA
×
×
×
means the interface is out of use or the connection is invalid. And the
Table 3.3Front Panel Operation in Live View
30
CVBS Main output
HDMI/VGA
HDMI
VGA
CVBS
Auxiliary
output
CVBS
CVBS
CVBS