Configuring More Settings - HIKVISION DS-9100HWI-ST Series User Manual

User Manual of DS-9100HWI-ST Series DVR

13.3 Configuring More Settings

Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 13.3.
3. Configure the following settings:
•
Device Name: Edit the name of DVR.
•
Device No.: Edit the serial number of DVR. The Device No. can be set in the range of 1~255, and
the default No. is 255.
•
Output Mode: Select the output mode to: Standard, Bright, Gentle or Vivid.
•
CVBS Output Brightness: Adjust the video output brightness.
•
Operation Timeout: Set timeout time for menu inactivity. E.g.,when the timeout time is set to 5
Minutes, then the system will exit from the current operation menu to live view screen after 5
minutes of menu inactivity.
4. Click theApply button to save the settings.
Figure 13.3More Settings Interface
190