Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
10.1Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with
Steps:
1.
Enter the HDD Informationinterface.
Menu > HDD>General.
2.
Select HDD to be initialized.
3.
Click the Init button.
4.
Select the OK button to start initialization.
Figure 10.1 HDD Information Interface
Figure 10.2 Confirm Initialization
Figure 10.3Start Initialization
155
yourDVR.
Advertisement
Table of Contents
