HIKVISION DS-9100HWI-ST Series User Manual page 75

User Manual of DS-9100HWI-ST Series DVR
Note:To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing
10.4 HDD Group.
3. Set the HDD to Read-only.
4. Click OK to save settings and back to the upper level menu.
Note:You can't save any files in a Read-only HDD. If you want to save files in the HDD, change the property
to R/W.
Note:If there is only one HDD and is set toRead-only, the DVR can't record any files. Only live view mode
is available.
If you set the HDD to Read-only when the DVR is saving files in it, then the file will be saved in next R/W
HDD. If there is only one HDD, the recording will be stopped.
Figure 5.41 HDD General-­‐ Editing
74