Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
10.6 Checking HDD Status
Purpose:
You may check the status of the installed HDDs onDVR so as to take immediate check and maintenance in case of
HDD
failure.
Checking HDD Status in HDD Information Interface
Steps:
1.
Enter the HDD Informationinterface.
Menu > HDD>General
2.
Check the status of each HDD which is displayed on the list, as shown in Figure 10.20.
Note:If the status of HDDisNormal or Sleeping, itworks normally. If the statusisUninitialized or Abnormal, please
initialize the HDD before use.And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1.
Enter the System Information interface.
Menu >Maintenance > System Info
2.
Click the HDD tab to view the status of each HDD displayed on the list, as shown in Figure 10.21.
Figure 10.20 View HDD Status (1)
167
Advertisement
Table of Contents
