Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
Menu >Configuration> Network
2.
Select the More Settingstab to enter the MoreSettings interface, as shown in Figure 9.20.
3.
Set Multicast IP, as shown in Figure 9.20. When adding a device to the Network Video Surveillance
Software, the multicast address must be the same as the DVR's multicast IP.
4.
Click theApplybutton to save and exit the interface.
9.2.8 Configuring RTSP
Purpose:
The RTSP (Real Time Streaming Protocol) is
communications systems to control streaming mediaservers.
Steps:
1.
Enter the Network Settings menu by clicking Menu >Configuration> Network.
2.
Select the More Settingstab to enter the More Settings menu, as shown in Figure 9.21.
Figure 9.19 Configure Multicast
a
network control protocol designed for use in entertainment and
Figure 9. 202RTSP SettingsInterface
147
Advertisement
Table of Contents
