Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
5.
Click theApply button to save and exit the interface.
9.2.3 Configuring NTP Server
Purpose:
A Network Time Protocol (NTP) Server can be configured on your DVR to ensure the accuracy of system date
and time.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the NTPtab to enter the NTPSettings interface, as shown in Figure 9.13.
3.
Check the Enable NTP checkbox to enable this feature.
4.
Configure the following NTP settings:
•
Interval: Time interval between the two synchronizing actionswith NTP server. The unit is
Figure 9.11NO-‐IP SettingsInterface
Figure 9.12NTP Settings Interface
142
Advertisement
Table of Contents
