Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
By connecting the DVR to network, the captured network data packet can be exported to USB-flash disk,
SATA/eSTATACD-RW and other localbackup devices.
Steps:
1.
Enter the Network Trafficinterface.
Menu >Maintenance>Net Detect
2.
Click the Network Detection tab to enter the Network Detection interface.
3.
Select the backup device from the dropdown list of Device Name, as shown in Figure 9.28.
Note: Click the Refresh button if the connected local backup device cannot be displayed. When it fails
to detect the backup device, please check whether it is compatible with the DVR. You can format the
backup device if the format is incorrect.
4.
Click the Export button to start exporting.
5.
After the exporting is complete, click OK to finish the packet export, as shown in Figure 9.30.
Note: Up to 1M data can be exported each time.
Figure 9.28Export Network Packet
Figure 9.29Packet Export Attention
153
Advertisement
Table of Contents
