Managing Network Hdd - HIKVISION DS-9100HWI-ST Series User Manual

User Manual of DS-9100HWI-ST Series DVR

10.2 Managing Network HDD

Purpose:
You can add the allocated NAS or disk of IP SAN to DVR, and use it as network HDD.
Steps:
1.
Enter the HDD Informationinterface.
Menu > HDD>General.
2. Click theAdd button to enter the Add NetHDD interface, as shown in Figure 10.6.
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
•
Add NAS disk:
Figure 10.5 HDD Information Interface
Figure 10.6HDD Information Interface
157