User Manual of DS-9100HWI-ST Series DVR
Enable SSL(optional): Click the checkbox to enable SSL if requiredby the SMTP server.
Sender: The name of sender.
Sender's Address: TheEmail addressof sender.
Select Receivers:Select the receiver. Up to 3 receivers can be configured.
Receiver: The name of user to be notified.
Receiver's Address: The Email address of user to be notified.
Enable Attached Pictures: Check the checkbox of Enable Attached Picture if you want to send
email with attached alarm images.The interval is the time of two adjacent alarm images. You can
also set SMTP port and enable SSL here.
Interval: The interval refers to the time between two actions of sending attached pictures.
E-mail Test: Sends a test message to verify that the SMTP server can be reached.
6.
Click the Apply button to save the Email settings.
7.
You can click the Test button to test whether your Email settings work. The corresponding Attention
message box will pop up. Refer to Figure 9.25.
Figure 9.24
Email Testing Attention
150