Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
3.4 Channel-zero Encoding
Purpose:
Sometimes you need to get a remote view of many channels in real time from web browser or CMS (Client
Management System) software, in order to decrease the bandwidth requirement without affecting the image
quality, channel-zero encoding is supported as an option for you.
Steps:
1.
Enter the Live View Settings interface.
Menu> Configuration> Live View
2.
Select the Channel-Zero Encodingtab.
3.
Check the checkbox after EnableChannel-Zero Encoding.
4.
Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
After you set the Channel-Zero encoding, you can get a view in the remote client or IE browser of all the
channels in one screen.
Figure 3.8 Live View-‐ Channel-‐Zero Encoding
36
Advertisement
Table of Contents
