User Manual of DS-9100HWI-ST Series DVR
9.2 Configuring Advanced Settings
9.2.1 Configuring PPPoE Settings
Purpose:
Your DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Enter the Network Settingsinterface.
Menu >Configuration> Network
2.
Select the PPPoEtab to enter the PPPoE Settings interface, as shown in Figure9.6.
3.
Check the PPPoEcheckbox to enable this feature.
4.
Enter User Name, Password, and Confirm Password for PPPoE access.
Figure 9.4 Net Fault-‐tolerance Working Mode
Figure 9.5PPPoE Settings Interface
138