Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
3.
Enter the RTSP port in the text field of RTSP Service Port. The default RTSP port is 554, and you can
change it according to different requirements.
4.
Click the Apply button to save and exit the menu.
9.2.9 Configuring Server and HTTP Ports
Purpose:
You can change the server and HTTP ports in the Network Settings menu. The default server port is 8000 and
the default HTTP port is80.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the More Settingstab to enter the More Settings interface, as shown in Figure 9.17.
3.
Enter new Server Port and HTTP Port, as shown in Figure 9.22.
4.
Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP
Port is 80, and you can change them according to different requirements.
5.
Click the Apply button to save and exit the interface.
Note:The Server Port should be set to the range of 2000-65535 and it is used for remote client softwareaccess.
The HTTP port is used for remote IE access.
9.2.10 Configuring Email
Purpose:
The system can be configured to send an Email notification to all designated users if an alarm event is detected,
etc., an alarm or motionevent is detected or the administrator password is changed.
Before configuring theEmail settings, theDVR must be connected to a local area network (LAN) that maintains
an SMTPmail server. The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
Figure 9.21Host/Others Settings Menu
148
Advertisement
Table of Contents
