Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
7.1.4 Backing up Video Clips
Purpose:
You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB
HDDs, USB writer), SATA writer or e-SATA HDD.
Steps:
1.
Enter Playback interface.
Please refer to Chapter 6.
2.
During playback, use buttons
file(s).
3.
Quit Playback interface after finishing clipping and you will then be prompted to save the clips.
Note:A maximum of 30 clips can be selected for each channel.
4.
Click Yesto save video clips and enter Export interface, or click No to quit and do not save video clips.
5.
Export.
Press Export button and start backup.
Note:If the inserted USB device is not recognized:
•
Click the Refresh button.
•
Reconnect device.
•
Check for compatibility from vendor.
You can also format USB flash drive or USB HDDs via the device.
and
in the playback toolbar to start or stop clipping record
Figure 7.26 Interface of Playback by Time
Figure 7.27 Attention to Video Clip Saving
112
Advertisement
Table of Contents
