Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
3.
ClickTrigger Channel tab and select one or more channels which will start to record/capture or
become full-screen monitoring when motion alarm is triggered.
Figure 8.3 Set Trigger Camera of Motion Detection
4.
Set up arming schedule of the channel.
Select Arming Schedule tab to set the channel's arming schedule.
Choose one day of a week and up to eight time periods can be set within each day.
Note:Time periods shall not be repeated or overlapped.
Figure 8.4 Set Arming Schedule of Motion Detection
5.
ClickHandling tab to set up alarm response actions of motion alarm (please refer to Chapter 8.6).
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy
button to copy an arming schedule to other days.
Click the OK button to complete the motion detection settings of the channel.
6.
If you want to set up motion detection for another channel, repeat the above steps or just copy the above
settings to it.
Note:You are not allowed to copy the "Trigger Channel" action.
121
Advertisement
Table of Contents
