Configuring Network Detection; Testing Network Delay And Packet Loss; Exporting Network Packet - HIKVISION DS-9100HWI-ST Series User Manual

User Manual of DS-9100HWI-ST Series DVR

9.4 Configuring Network Detection

Purpose:
You can obtain network connecting status of DVR through the network detection function, including network
delay, packet loss, etc.
9.4.1Testing Network Delay and Packet Loss
Steps:
1. Enter the Network Trafficinterface.
Menu >Maintenance>Net Detect
2. Click the Network Detection tab to enter the Network Detection menu, as shown in Figure 9.27.
3. Enter the destination address in the text field of Destination Address.
4. Click the Test button to start testing network delay and packet loss. The testing result pops up on the
window. If the testing is failed, the error message box will pop up as well. Refer to Figure 9.28.
Figure 9.27Testing Result of Network Delay and Packet Loss
9.4.2 Exporting Network Packet
Purpose:
Figure 9.26 Network Detection Interface
152