Setting Up Motion Detection - HIKVISION DS-9100HWI-ST Series User Manual

User Manual of DS-9100HWI-ST Series DVR

8.1 Setting up Motion Detection

Steps:
1. Enter Motion Detection interface of Camera Management and choose a camera you want to set up
motion detection.
Menu> Camera> Motion
2. Set up detection area and sensitivity.
Tick "Enable Motion Detection", use the mouse to draw detection area(s) and drag the sensitivity bar to
set sensitivity.
Press Handling button and set alarm response actions.
Figure 8.1 Motion Detection Setup Interface
Figure 8.2 Set Detection Area and Sensitivity
120