Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
Steps:
1.
Enter the playback interface.
Menu>Playback
2.
Select Event tab to enter the Event Playback interface.
3.
SelectAlarm Inputas the event type.
4.
Click Search button to enter the Search Result interface.
If you want to play back recorded files associated with motion detection, choose Motion as event type
and clickSearch button to enter the Search Result interface.
5.
Click
button to enter the Playback interface.
If there is only one channel is triggered by an alarm input, pressing
Playback interface of this channel.
If several channels are triggered, pressing
Note:Pre-play and post-play can be configured.
Figure 6.15 Video Search by Alarm Input
Figure 6.16 Video Search by Motion
button takes you to step 7 and then step 8.
84
button takes you to Full-screen
Advertisement
Table of Contents
