Ir Remote Control Operations - HIKVISION DS-7100 User Manual

1.2 IR Remote Control Operations

The DVR may also be controlled with the included IR remote control, shown in Figure 1. 8.
Batteries (2×AAA) must be installed before operation.
The keys on the remote control resemble the ones on the front panel. Refer to Table 1. 7, they include:
No. Name
1 POWER
2 MENU Button
3 REC Button
1
Does not apply to DS-7100, which does not support remote control use.
User Manual of Digital Video Recorder
Figure 1. 8 Remote Control
Table 1. 7 Description of the IR Remote Control Buttons
Power on/off the device.
Power on/off the device by pressing and holding the button for 3 seconds.
Press the button to return to the main menu (after successful login).
Press and hold the button for 5 seconds will turn off audible key beep.
In PTZ Control mode, the MENU button will start wiper (if applicable).
In Playback mode, it is used to show/hide the control interface.
Enter the Manual Record setting menu.
In PTZ control settings, press the button and then you can call a PTZ preset
by pressing Numeric button.
24
1
Description