Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
1.
Enter Alarm Output interface.
Menu> Configuration> Alarm> Alarm Output
Select an alarm output and set alarm name and dwell time. Press Schedule button to set the arming
schedule of alarm output.
Note:If "Manually Clear" is selected in the dropdown list of Dwell Time, you can clear it only by going
to Menu> Manual> Alarm.
2.
Set up arming schedule of the alarm output.
Choose one day of a week and up to 8 time periods can be set within each day.
Note:
Time periods shall not be repeated or overlapped.
3.
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy
button to copy an arming schedule to other days.
Click the OK button to complete the video tampering settings of the alarm output No.
Figure 8.20 Alarm Output Setup Interface
Figure 8.21 Set Arming Schedule of Alarm Output
132
Advertisement
Table of Contents
