Table of Contents
Advertisement
User Manual of DS-9100HWI-ST Series DVR
Note: The User Name and Password should be assigned by your ISP.
5.
Click theApply button to save and exit the interface.
6.
After successful settings, the system asks you to reboot the device to enable the new settings, and the
PPPoE dial-up is automatically connected after reboot.
You can go to Menu >Maintenance>System Info >Network interface to view the status ofPPPoE
connection. Please refer to Chapter 12.1Viewing System Information for PPPoE status.
9.2.2 Configuring DDNS
Purpose:
If your DVR is set to use PPPoE as its default network connection, you may set DynamicDNS (DDNS) to be
used for network access.
Prior registration with your ISP is required beforeconfiguring the system to use DDNS.
Steps:
1.
Enter the Network Settings interface.
Menu >Configuration> Network
2.
Select the DDNStab to enter the DDNS Settings interface, as shown in Figure 9.8.
Figure 9.6PPPoE Settings Interface
139
Advertisement
Table of Contents
