HIKVISION DS-9100HWI-ST Series User Manual page 16

User Manual of DS-9100HWI-ST Series DVR
REC/SHOT
PLAY/AUTO
ZOOM+
A/FOCUS+
EDIT/IRIS+
MAIN/SPOT/ZOOM-
F1/ LIGHT
F2/ AUX
MENU/WIPER
PREV/FOCUS-
PTZ l/IRIS
DIRECTION/ENTER
8
ENTER
JOG SHUTTLE
9
Control
10
POWER ON/OFF
Note:If GUARD indicator is green (default), all the alarm event and exception settings are valid. Otherwise,
Entering the Manual Record setting menu. In PTZ control settings, press
the REC/SHOT button and then you can call a PTZ preset by pressing
Numeric button.
The PLAY/AUTO button is used to enter the Playback menu. It is also
used to turn audio on/off in the Playback menu and auto scan in the PTZ
Control menu.
Zooming in the PTZ camera in the PTZ Control setting.
Adjusting focus in the PTZ Control menu. It is also used to switch
between input methods (upper and lowercase alphabet, symbols and
numeric input). It can also be used to clear entire masked areas, such as in
the Motion Detection and Privacy Mask menus.
The EDIT/IRIS+ button is used to edit text fields. When editing text
fields, it will also function as a Backspace button to delete the character in
front of the cursor. On checkbox fields, pressing the EDIT/IRIS+ button
will checkthe checkbox. In PTZ Control mode, the EDIT/IRIS+ button
opens up the iris of the camera. In Playback mode, it can be used to
generate video clips for backup.
The MAIN/SPOT/ZOOM- button is used to switch between main and spot
output. In PTZ Control mode, it can be used to zoom out the image.
The F1/LIGHT button when used in a list field will select all items on the
list. In PTZ Control mode, it will turn on/off PTZ light.
The F2/AUX button is used to cycle through tab pages.
Pressing the MENU/WIPER button will return the user to the Main menu
(after successful login). Pressing and holding the button for 5 seconds will
turn off audible key beep. The MENU/WIPER button will also bring up
Sensitivity Interface settings. In PTZ Control mode, the MENU/WIPER
button will start wiper (if applicable).
The PREV/FOCUS- button is used to switch between single screen and
multi-screen mode. In PTZ Control mode, it is used to adjust the focus in
conjunction with the A/FOCUS+ button. It can also be used to select
entire masked areas, such as in Motion Detection and Privacy Mask
menus.
The PTZ/IRIS- button is used to enter the PTZ Control mode. When in the
PTZ Control mode, it is used to close the iris of the PTZ camera.
The DIRECTION buttons are used to navigate between different fields
and items in menus. In Playback mode, the Up and Down button is used to
speed up and slow down recorded video. The Left and Right button will
select the next and previous day of recordings. In Preview mode, these
buttons can be used to cycle through channels.
The ENTER button is used to confirm selection in any of the menu
modes. It can also be used to tick checkbox fields. In Playback mode, it
can be used to play or pause the video. In Single-channel Play mode,
pressing the ENTER button will advance the video by a single frame.
The JOG SHUTTLE control can be used to move the active selection in a
menu. It will move the selection up and down. In the Playback mode, the
ring is used to jump 30s forward/backward in video files. In Live View
mode, it can be used to cycle through different channels.
Power on/off switch.
15