Ethernet Port ID
The Ethernet ports on the BitStorm 4800 are identified by the following names:
T
T
T
These can be used alone or in combination with the unit number to identify the
three ports. Unit number is described in
term Port ID in this manual, in reference to an Ethernet port, refers to any of the
possible identifiers for an Ethernet port.
Example:
IAC#configure interface ethernet downlink mode auto
IAC#configure interface ethernet 1/uplink mode auto
Reserved Names
The following are reserved names and may not be assigned as DSL port names:
T
T
T
T
T
T
T
4800-A2-GB20-10
mgmt – for the MGMT port
downlink – for the Ethernet DOWNLINK GigE port
uplink – for the Ethernet UPLINK GigE port
/ (slash)
all
dhcp
downlink
mgmt
uplink
v35
July 2002
2. Terminology and Conventions
System Terminology
on page 2-1. The
2-3