Pdn-Syslog-Mib; Pdn-Uplink-Tagging-Mib; Pdn-Stackable-Mib; Pdn-Device-Time-Mib - Paradyne BitStorm 4800 User Manual

PDN-SYSLOG-MIB

The PDN-SYSLOG-MIB is used to implement a system log.
Table C-78. PDN-SYSLOG-MIB Objects
Object
pdnSyslogStatus
pdnSyslogIPAddr
pdnSyslogLevel
pdnSyslogPort
pdnSyslogSeverityThreshold
pdnSyslogRemoteDaemon
pdnSyslogTable
pdnSyslogNumOfMsgInTable
pdnSyslogMaxTableSize
pdnSyslogClearTable
pdnSyslogMsgToConsole
pdnSyslogRateLimiting

PDN-UPLINK-TAGGING-MIB

The PDN-UPLINK-TAGGING-MIB describes the objects used to configure uplink
tagging. See
Descriptions , for the possible values of ultBaseVlanTag (Base) and ultIndex
(Index).

PDN-STACKABLE-MIB

The PDN-STACKABLE-MIB defines objects used to administer a stackable
product. The wanInterface object is supported, and may be one of:
T
T

PDN-DEVICE-TIME-MIB

The PDN-DEVICE-TIME-MIB contains objects used to procure the date and time
using SNTP. The devNTP group is fully supported.
4800-A2-GB20-10
OID Syntax
{ pdnSyslog 1 } INTEGER
{ pdnSyslog 2 } IpAddress
{ pdnSyslog 3 } INTEGER
{ pdnSyslog 4 } Integer32
{ pdnSyslog 5 } INTEGER
{ pdnSyslog 6 } INTEGER
{ pdnSyslog 7 } SEQUENCE OF
pdnSyslogEntry
{ pdnSyslog 8 } Integer32
{ pdnSyslog 9 } Integer32
{ pdnSyslog 10 } INTEGER
{ pdnSyslog 11 } INTEGER
{ pdnSyslog 12 } INTEGER
Table A-20, VLAN Tag Ranges,
stackLink1 (0) – The WAN interface is the GigE Uplink port.
plugInModule (2) – The WAN interface is the one supplied by the
Management Module.
July 2002
C. MIB Support
Access Status
read-write current
read-write current
read-write deprecated
read-write deprecated
read-write current
read-write current
not- current
accessible
read-only current
read-only current
read-write current
read-write current
read-write current
in Appendix A, CLI Command
Supported
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
C-59