Copy; End - Paradyne BitStorm 4800 User Manual

Copy

The copy command saves and restores configurations.
Table A-23. Copy Command

End

The end command terminates privileged mode.
Table A-24. End Command
4800-A2-GB20-10
copy ftp { ip_address } { user_name } { password } { filename }
startup-config
copy running-config startup-config
copy startup-config ftp { ip_address } { user_name } { password }
{ filename }
copy startup-config running-config
Minimum Access Level: Administrator
The copy command copies the configuration of the BitStorm 4800. It can be used to save
and recover configurations.
ftp – Specifies that the source or destination file is on an FTP server. The ftp keyword
must be followed in order by:
– ip_address – The IP address of the FTP server
– user_name – A user name allowed on the FTP server
– password – The password associated with the user name
– filename – The name of the source or destination file
running-config – Specifies that the source or destination file is the configuration in active
volatile memory. The running configuration is not permitted as the source or destination of
an FTP operation.
startup-config – Specifies that the source or destination file is the configuration in
non-volatile memory.
Example:
IAC#copy ftp 135.90.28.28 ftpuser ftppw save.config startup-config
end
Minimum Access Level: Administrator
The end command terminates a privileged mode session and continues the session in
standard mode. If the end command is executed by a user not in privileged mode, it
places the user at the top of the command tree like one or more back commands.
Example:
IAC#end
You are ending your privilege mode session
IAC>_
July 2002
A. CLI Command Descriptions
A-47