Ifadminstatus - Paradyne BitStorm 4800 User Manual

C. MIB Support

ifAdminStatus

The desired state of the interface:
T
T
T
Table C-16. ifAdminStatus
Location Interface
External Console Port
External Modem Port
External Ethernet Management Ports
External Ethernet Downlink Ports
External Ethernet Uplink Ports
External Ethernet/PPP Layer 2 Uplink Port
External PPP Uplink HDLC Interface
External PPP Uplink PPP Interface
Internal PPP Uplink Ethernet Interface
Internal Layer 2 Switch PPP Uplink Processor Ethernet
Interface
External ADSL Ports
External ATM Interfaces
External Port Processor Ethernet Interfaces
Internal Port Processor L2 Switch Ethernet Interfaces
Internal L2 Switch Port Processor Ethernet Interfaces
Internal Management Processor L2 Switch Ethernet
Interface
Internal L2 Switch Management Processor Ethernet
Interface
C-20
up(1) – The interface is operational and operational packets can be passed
down(2) – When a managed system is initialized, all interfaces start with
ifAdminStatus in the down(2) state
testing(3) – The interface is in a test state and no operational packets can be
passed
July 2002
Value
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1)
Only valid values are up(1) or down(2)
Only valid values are up(1) or down(2)
Only valid values are up(1) or testing(3)
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1), down(2), or testing(3)
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1)
Only valid value is up(1)
4800-A2-GB20-10