Configure User-Accounts - Paradyne BitStorm 4800 User Manual

A. CLI Command Descriptions

Configure User-Accounts

The configure user-accounts commands create and delete user accounts for
managing the BitStorm 4800.
Table A-22. Configure User-Accounts Command
A-46
configure user-accounts
create { user } { login_password } [ privilege_password ]
Minimum Access Level: Administrator
The configure user-accounts create command creates a user account and defines
passwords for it. It also can be used to change passwords.
user – Specifies a user name of 1–15 printable characters. Spaces are not allowed. If the
user already exists, the command modifies the password or passwords for the user.
login_password – Specifies a password of 1–15 printable characters. Spaces are not
allowed. A login password is required of all users.
privilege_password – Specifies a password of 1–15 printable characters. Spaces are
not allowed. The optional second password allows users to enter privileged mode to
configure the system. The privilege password must be different than the login password.
Example:
IAC#configure user-accounts create admin2 sesame vip
IAC#configure user-accounts create admin2 sesame newpass
configure user-accounts delete { user }
Minimum Access Level: Administrator
The configure user-accounts delete command deletes a user account.
user – Specifies the user account to be deleted.
Example:
IAC#configure user-accounts delete tempacct
July 2002 4800-A2-GB20-10