T Features - Paradyne BitStorm 4800 User Manual

Features
The BitStorm 4800 IP DSLAM has the following features:
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
4800-A2-GB20-10
Compact size (height = 1U)
Shelf-mountable (up to eight units high) and rack-mountable
Low price per port
Up to 48 ports per unit
Up to 384 ports per stack, with a single high-speed uplink
Multiple uplink options:
— Gigabit Ethernet uplink using wire or fiber
— V.35, EIA-530-A, or X.21 uplink using Model 4804 Management Module
with suitable adapter
Little or no connection management and configuration (uses learning bridge
capabilities of Ethernet)
IEEE 802.3x standards-based flow control for maximum performance and
minimum packet loss
Auto-rating DSL technology to adjust to line conditions
Auto-sensing on all Ethernet ports to adjust automatically to the speed of
attached devices
Automatic detection of full duplex or half duplex operation on all Ethernet ports
Automatic switchover detection for Medium-Dependent Interface (MDI) and
MDI crossover (MDIX) connections, ensuring plug-and-play compatibility with
hubs and endstations
Web-based server for management
Virtual Private Networking (VPN) for management, using the IPSec security
protocol
Command Line Interface (CLI) like that of popular routers
Support for Simple Network Management Protocol (SNMP) Version 1 and
Version 2
Support for off-the-shelf Asynchronous DSL (ADSL) endpoints
Uplink VLAN tagging for billing and access control
July 2002
1. BitStorm 4800 Overview
1-3