pdnAtmStat Group
The pdnAtmStat group consists of ATM statistics.
Table C-62. pdnAtmStat Group
Object
pdnAtmStatTable
PDN-CONFIG-MIB
The PDN-CONFIG-MIB is used to configure the DSL ports. It comprises the
following groups:
Table C-63. PDN-CONFIG-MIB Objects
Object
devConfigArea
devConfigTestTimer
devConfigClockSrc
devConfigTrap
devConfigAlarm
devConfigCardType
devConfigNetSync
devConfigTime
devConfigChangeKeys
devConfiguration
devConfiguration Group
The devConfiguration group is used for general configuration.
Table C-64. devConfiguration Group
Object
devConfigComDiscTime
devConfigPortNumDisplayFormat
devConfigDateDisplayFormat
devAcceptRemoteResetFrame
4800-A2-GB20-10
OID
Syntax
{ pdnAtmVclStat 2 } SEQUENCE OF
pdnAtmStatEntry
OID
{ pdn-devConfig 1 }
{ pdn-devConfig 2 }
{ pdn-devConfig 3 }
{ pdn-devConfig 4 }
{ pdn-devConfig 5 }
{ pdn-devConfig 6 }
{ pdn-devConfig 7 }
{ pdn-devConfig 8 }
{ pdn-devConfig 9 }
{ pdn-devConfig 10 }
OID
{ devConfiguration 1 } INTEGER
{ devConfiguration 2 } INTEGER
{ devConfiguration 3 } INTEGER
{ devConfiguration 4 } INTEGER
July 2002
Access
not-accessible
Description
The device Configuration Area Group
The Test Timeout Group.
The Clock Source Group
The Trap Configuration Group
The System Alarm Group
The Card Type Table
The Device Network Synchronization Group
The Device Configuration Time Group
The Device Configuration Change Key Group No
The General Configuration Group
Syntax
Access
read-write
read-write
read-write
read-write
C. MIB Support
Status
Supported
current
Yes
Supported
No
Yes
No
No
No
No
No
Yes
Yes
Status
Supported
mandatory
Yes
mandatory
Yes
mandatory
Yes
mandatory
Yes
C-51